Tongue and Groove Roofing, LED Lights and Carpet

Moving right along....

So after placing and taping a lot of insulation to the roof (duct tape to Dialls Loft Insulation in place, and then foil tape to cover that over with foil insulation, and seal the edges), we went back to B&Q, and bought some slim tongue and groove wood.

We bought x5 packs of 2 metre stuff, and I still have 1.2 packs to spare! Due to the planks I installed on the roof previously, this didn't take very long at all and was very easy.

Therefore I can move swiftly onto the LED Lights. These came from Amazon, cost about £15 for all 3. Again, having previously installed all the wiring through conduit, these just needed crimping together and screwing to the tongue and groove wood. Simple.

And now to carpet, again very easy! Bought 5m squared of the stuff plus x4 bottles of adhesive as a kit from eBay for £45. Might have been easier with two people, but I seem to have managed just fine :)

Below is also the time lapse of everything mentioned in this post:


Comments

Popular posts from this blog

Summer is about to kick off

The weather is what we talk about best as British people....

MORE MODS!!!